Bloque: priceitemsCódigo UNSPSC | Descripción | Cantidad | Unidad | Precio unitario estimado | Precio unitario |
---|
31111510 | Filamento para impresora 3D por rollo de 750 gramos; Material de composición: ABS Diámetro: 2,85 mm Aspecto: Filamento Color: Negro Punto de ignición Temperatura de ignición Descomposición térmica: > 280 ºC Temperatura de auto-inflamación Punto/intervalo de fusión: 225-245 ºC Densidad: 1,10 g/cm | 17,00 | UN | 201.348,00 | | 31161532 | Tornillo para llave Hexagonal 5mm, Diámetro nominal 5 mm y longitud 30mm cabeza cilíndrica con ranura hexagonal para lleve allen. tipo tornillo prisionero en acero Con tureca y dos arandelas de seguridad Rosca métrica normalizada | 500,00 | UN | 898,45 | | 32101626 | Tarjeta de Desarrollo Raspberry Pi 3 B+: CanaKit Raspberry Pi 3 B+ (B Plus) Ultimate Starter Kit (32 GB Edition, Clear Case)
Includes Made in UK Raspberry Pi 3 B+ (B plus) with 1.4 GHz 64-bit Quad-Core Processor, 1 GB RAM, Dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Enhanced Ethernet Capability
32 GB Micro SD Card (Class 10) pre-loaded with NOOBS, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)
High Quality Raspberry Pi 3 Case, Premium Quality 6.5 feet HDMI Cable, Heat Sink, CanaKit Full Color Quick-Start Guide
CanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Large Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference Cards
RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches | 2,00 | UN | 448.928,00 | | 32101626 | Tarjeta de Desarrollo LattePanda 4G/64GB: Tarjeta de desarrollo LattePanda de ultima generación con Licencia Windows 10 Enterprise
Processor Intel Cherry Trail Z8350 Quad Core
Base Frequency: 1.44GHz (1.92GHz Burst Frequency)
Operation System Pre-installed full edition of Windows 10 Enterprise LTSB x64 with activate key
Ram 4GB DDR3L
Storage Capability 64GB
GPU Intel HD Graphics 12EUs a 200-500Mhz single-channel memory
One USB3.0 port and two USB 2.0 ports
WiFi 802,11n 2.4G and Bluetooth 4.0
Built-in Arduino Co-processor ATmega32u4 (Aerduino Leonardo)
Video output HDMI and MIPI-DSI
Onboard touch panel overlay connector
Supports 100Mbps Ethernet
GPIO 6 GPIOs from Cherry Trail processor
20 GPIOs from Arduino Leonardo
6 Plug and play Gravity sensor connectors
Power 5v/2A
Dimension of board 88*70 mm/ 3.46*2.76 inches
Packing Size 110*94*30 mm/4.33*3.70*1.18 inches | 2,00 | UN | 1.181.046,00 | | 43202005 | Memoria Flash uSD 64GB: Tarjeta de memoria microSD UHS-I de 32 GB, velocidad de lectura hasta 100MB/s, Clase 10
Capacidad: 32GB
Velocidad de lectura: hasta 100MB/s
Velocidad de video: C10, U1, A1
Factor de forma: microSDXC | 4,00 | UN | 52.033,00 | | 32101667 | 3D Depth Camera Intel Realsense D435: Camara 3D con sensor de profundidad Intel Realsense D435
Especificaciones
Tecnología de profundidad Stereoscopic
Resolución y FPS profundos 1280 X 720
Campo de visión profundo 85.2 x 58
Sensor de RGB
Dimensiones 90mm x 25mm x 25mm
Tipo de interfaz de sistema USB 3.0 Type C | 2,00 | UN | 1.157.008,00 | | 32101667 | Seed Studio DepthEye 3D: Camara ToF de profundidad DepthEye de Seed Studio
The Depth Eye is the cost-effective TOF base depth camera. It use TI opt8320 sensor and pass all depth data including pointcloud via USB cable.
Caracteristicas
USB 2.0 interface
Provide Pointcloud and RAW depth data
FOV?D*H*V ? 90*75*59mm
2850nm band infrared LED
F/NO. is 1.09
TI OPT8320 sensor
Resolution is 80*60 pixeles | 1,00 | UN | 899.908,00 | | 26111701 | Batería Recargable Li-Po: Batería Recargable de Polímero de Litio
Conector JST XHR 2.54mm 2 pin
Capacidad 3.7V 1000mAh | 4,00 | UN | 24.396,00 | | 39121528 | LIDAR: tinyLiDAR ToF Range Finder Sensor
Eye Safe Laser 940nm Class 1
Long Range: up to 2 meters / Accuracy: 3%
Integrated level shifter for native 3v to 5v operation
Remotely re-configurable I2C board address and operation modes
60Hz sample rates
Advanced Technology Eye safe VCSEL Class 1 Laser
Ultra Fast up to 60Hz sample rates and up to approx 930Hz I2C reading rates even with an Arduino UNO
Accurate to 3% with mm precision
Dimensions 21x25x8.3mm | 2,00 | UN | 135.512,00 | | 26101200 | Motor vibrador tipo disco: The 2mm Mini Vibrating Disk Motor worked at 3V can be used for multipurposes.
Mini vibration motor 2.0mm
Rated Voltage: 3.0V DC
Flat coreless core
Motor construction: 10- Flat coreless vibration motor
Coil construction: Flat coreless core
Rectifying method: Precious brush and commutator
Rated Load: Vibration weight
Rotation direction: CCW or CW
Motor position: Any position available
Voltage range for use: DC 2.5V - 3.5V
Allowable temperature range: -20ºC to 70ºC
Storage environment: -30ºC- 80ºC
Thickness: 2mm
Diameter: 10mm | 20,00 | UN | 6.492,00 | | 39122002 | Haptic Motor Driver Board: The SparkFun Haptic Motor Driver - DRV2605L is capable of driving two different types of motors, ERM and LRA. It is important to know, however, that the default firmware for the DRV2605L is set for use with ERM-type motors. An Arduino library that makes the DRV2605L easy to use with six different ERM effects and one LRA effect is available.
Flexible Haptic and Vibration Driver
Suitable for both ERM and LRA type motors
I2C-Controlled Digital Playback Engine
PWM input with 0?100% Duty-Cycle Control Range | 20,00 | UN | 39.478,00 | | 32101600 | Touch sensor Board: Capacitive Touch Slide Sensor Board
SeeedStudio Grove Capacitive Touch Slide Sensor CY8C4014LQI
Comes with a 32-bit MCU Subsystem
Uses a 16-MHz ARM Cortex-M0 CPU
Automatic hardware tuning (SmartSense) over a sensor range of 5pF to 45pF
Provides an I2C interface
Weight: G.W 8.20g
Operating Voltage 3.3V / 5V
Operating Ambient Temperature -40 °C to +85 °C
Operating Junction Temperature -40 °C to +100 °C
Interface: I2C
Default I2C Address 0x08
Size 20mm x 60mm x6mm | 2,00 | UN | 46.232,00 | | 32101661 | IMU sensor Board: Sensor inercial montado en board 9-DOF Absolute Orientation IMU Fusion BNO055 Board
The BNO055 can output the following sensor data:
Absolute Orientation (Euler Vector, 100Hz) Three axis orientation data based on a 360° sphere
Absolute Orientation (Quaterion, 100Hz) Four point quaternion output for more accurate data manipulation
Angular Velocity Vector (100Hz) Three axis of 'rotation speed' in rad/s
Acceleration Vector (100Hz) Three axis of acceleration (gravity + linear motion) in m/s^2
Magnetic Field Strength Vector (20Hz) Three axis of magnetic field sensing in micro Tesla (uT)
Linear Acceleration Vector (100Hz) Three axis of linear acceleration data (acceleration minus gravity) in m/s^2
Gravity Vector (100Hz) Three axis of gravitational acceleration (minus any movement) in m/s^2
Temperature (1Hz) Ambient temperature in degrees celsius
Dimensions: 20mm x 27mm x 4mm / 0.8" x 1.1" x 0.2"
Header holes begin 4mm from the mounting holes
Mounting Hole dimensions: 20mm x 12mm apart
Uses I2C address 0x28 (default) or 0x29
Weight: 3g | 1,00 | UN | 123.225,00 | | 41111926 | Gesture Sensor Board: The ZX Distance and Gesture Sensor Board is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor uses their GestureSense® technology to recognize the distance of an object away from the sensor up to about 12 inches (30cm, referred to as the ?Z? axis) and the location of the object from side to side across the sensor in about a 6-inch (15cm) span, referred to as the ?X? axis. You will be able to use I2C or UART to communicate with the ZX Sensor via a microcontroller or computer.
Operating Voltage: 3.3V?5V
Z-Axis Recognition Range: 12 inches (~30cm)
X-Axis Recognition Range: 6 inches (~15cm)
4 Supported Gesture Commands
I2C or UART Communication
SMD Components and Compact Design | 1,00 | UN | 123.612,00 | | 41111926 | Gesture Sensor Board: The Gesture Sensor Board offers touchless gesture sensing, which means you can issue orders simply with a swipe of your hand! Except this, it supports RGB color detecting and ambient light measuring. This sensor has a high quality and accuracy: Its sensor module uses the APDS-9960 chip (a single 8 pin package digital RGB, ambient light, short and gesture sensor device); infrared LED helps measuring the short-range and gestures. Moreover, the sensor is able to work under low- light conditions thanks to its RGB and environmental light perception measurement.
High quality and accuracy
Able to work under low light conditions
Touchless gesture sensing
Operating Voltage: 3.3-5V
Interface:
I2C interface x1
Interrupt pin x1
Detecting range: 100mm
Module size: 18.3x16.4mm | 1,00 | UN | 103.030,00 | | 41111926 | Gesture Sensor Board: The Grove - Gesture Sensor Board that integrates gesture recognition function with general I2C interface into a single chip.
9 gesture recognition
Built-in proximity detection
Can recognize 9 gestures including move up, move down, move left, move right, etc
Can make a remote-control unit
Interface:IIC
Operating Power:5V
Dimensions:20*20mm
Sensor: PAJ7620U2
Detecting range: 5 ? 15cm
Ambient light immunity: < 100k Lux
Gesture speed mode: Normal and Gaming | 1,00 | UN | 73.477,00 | | 41111926 | Human Presence Sensor Board: The Grove Human Presence Sensor AK9753 Board can be used to detect the presence of the human body or any other infrared objects. Moreover, it is composed of four quantum IR sensors and an integrated circuit for characteristic compensation.
Grove Human Presence Sensor
Quantum-type IR Sensor with 4 IR Elements
16-bits Digital Outputs to I2C bus
Integrated temperature sensor
Interrupt Function / Low Current Consumption
Quad infrared sensor module
16-bit reading on all four channels
Digital I2C Interface
Voltage: 1.7V to 3.3V
Extremely low current: 100µA | 2,00 | UN | 94.814,00 | | 52161520 | Microfono piezoelectrico montado en Board: ADMP401 MEMS Microphone Board
-3dB roll off at 100Hz and 15kHz
1.5 to 3.3VDC supply voltage
Should comfortably output 40mW
SNR of -62dBA | 1,00 | UN | 61.910,00 | | 52161500 | Modulo conversor de texto a voz: The Parallax Emic 2 Text-to-Speech Module is a voice! Designed in conjunction with Grand Idea Studio, the Emic 2 Text-to-Speech Module is a multi-language voice synthesizer that converts a stream of digital text into natural sounding speech. Its simple command-based interface makes it easy to integrate into any embedded system.
Operating Temperature: -20 to +70 ºC (-4 to +158 ºF)
High quality speech synthesis for English and Spanish languages
Power requirements: +5 VDC, 30 mA idle, 46-220 mA active
Communication: Asynchronous 9600 bps serial (8N1) | 2,00 | UN | 370.685,00 | | 52161500 | Módulo de reconocimiento de voz: The EasyVR DK Speech Recognition Module 3.0 is a multi-purpose speech recognition module designed to easily add versatile, robust and cost effective speech recognition capabilities to almost any application. It can be used with any host with an UART interface powered at 3.3V ? 5V, such as PIC and Arduino boards.
Up to 32 user-defined voice commands that can be trained in ANY language
A selection of 26 built-in Speaker Independent (SI) commands for ready-to-run basic controls
Includes QT2SI Lite License
SonicNet technology for wireless communications between modules or any other sound
Up to 22 minutes of pre-recorded sounds or speech
Differential audio output that directly supports 8? speakers
Use QuickUSB 3.3V USB to UART Interface Cable to use with a PC
Supports audio message recording and playback
Included
EasyVR 3 Module
QuickUSB cable
QT2SI Lite License | 2,00 | UN | 1.308.256,00 | | 52161500 | Gafas de sol con auriculares y microfono integrado Bluetooth: Gafas De Sol Inalámbricas Forestfish Color Negro Con Micrófono y Auriculares Bluetooth y sensor touch | 1,00 | UN | 373.095,00 | | 32101626 | Intel Neural Compute Stick 2: The Intel Movidius Neural Compute Stick 2 is a miniature deep learning hardware development platform that you can use to prototype, tune, and validate, your AI programs, specifically Deep Neural Networks. It features the same Movidius vision processing unit (VPU) used to bring machine intelligence to drones, surveillance cameras, and VR or AR headsets now, in a USB stick form factor.
Real-time on-device inference; no cloud connectivity required
No additional heat-sink, no fan, no cables, no additional power supply
Prototype, tune, validate and deploy deep neural networks at the edge | 2,00 | UN | 579.797,00 | | 39121528 | TeraRanger Evo 3m ToF Rangefinder: The TeraRanger Evo 3m ToF Rangefinder offers 10cm to 3m range, 100Hz fixed update rate and greater accuracy, Evo 3m, is optimized for close-range distance measurement All in an easy to use, small and lightweight form-factor.
Range: 0.1 ? 3 meters
Update Rate Fixed 100Hz
Field of view 2° Approx
USB, 12C and Uart interfaces
Range Resolution 0.5cm
Accuracy: ±2cm
Supply Voltage: 5V DC +/-5%
Supply Current: 70mA-250mA
Black sensor module 9g
Yellow backboard 3g
Total: 12g
Range: 0.1 ? 3 meters
Update rate: Fixed 100Hz
Field of view: 2° Approx
Interfaces USB 2.0 Micro-B, UART, I2C | 1,00 | UN | 650.811,00 | | 32101656 | Modulo GPS GSM GPRS: The Elecrow 32u4 w/ A9G GPRS GSM GPS Board is based on Mega32u4 and A9 GPRS / GSM / GPS module. It can be used to make a call, send a text message and get GPS positioning.
Support the GSM / GPRS / GPS Quad-band, including 850, 900, 1800, 1900 MHz
Is equipped with a 3.5mm headphone jack
Comes with a low standby average current, only 3mA or less
Working voltage: 3.3 - 5V
Operating temperature: -30 °C to + 80 ?
Quad-band: 850 / 900 / 1,800 / 1,900 MHz
GPRS multi-slot: 12.1 to 12 can be configured
GPRS mobile station: Class B
Current consumption: 1.3mA @ DRX = 5; 1.2mA @ DRX = 9
AT command control: Standard GSM07.07, 07.05 AT commands and Ai-Thinker extended commands
GPRS Class 10: Up 85.6 kbps (upstream) & 42.8Kbps (downlink)
Dynamic Conditions Altitude: <18,000 meters (60,000 feet) | 2,00 | UN | 111.666,00 | | 41111960 | Micro sensor ultrasonido: Micro Sensor Ultrasonido RCW-0001
Distance Measuring module robot electronics 3.3-5v 1cm Ultra-small blind Ultrasonic Sensor
Working Voltage: 3.0V to 5.5VDC
Compatible with HC-SR04 protocol
Pin to pin compatible with HC-SR04, direct replacement
Minimum detection distance: 1cm
Maximum detection range:
3.3V: 400cm
5.0V: 450cm
Operating current:
3.3V: 2.2mA
5.0V: 2.8mA
Resolution: 1mm
Detection angle: 15º
Operating temperature: -20ºC to +80ºC | 12,00 | UN | 16.689,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Blanco para Impresora 3D 1Kg | 2,00 | UN | 173.442,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Negro para Impresora 3D 1Kg | 2,00 | UN | 173.442,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Trasparente para Impresora 3D 1Kg | 2,00 | UN | 237.851,00 | | 32101628 | Arduino Micro: El nuevo Arduino Micro es una evolución de su hermano mayor Arduino Leonardo ya que utiliza el mismo chip ATmega32u4 pero en un formato mucho más pequeño de tan solo 48x18mm.Una de las mayores ventajas de este chip es que dispone de un puerto USB nativo que permite entre otras cosas de evitar tener un conversor serie/USB y además de poder programar la placa como un dispositivo USB cliente como un teclado o un ratón.
Microcontrolador: ATmega32u4
Voltaje de operación: 5v
Voltaje de alimentación (Recomendado): 7-12V
Canales PWM: 7
Entradas Análogas: 12
Cristal oscilador: 16MHz
Dimensiones: 48x18mm
Precargado con bootloader
Puede ser programado como un dispositivo USB genérico. | 4,00 | UN | 109.182,00 | | 52161500 | Oculus - Rift + Touch Virtual Reality Headset Bundle for Compatible Windows PCs - Black: Sensors Proximity Sensor; Movement Tracking Yes; Wireless No; Control Type Motion Controller;Integrated Speaker(s) Yes; Adjustable Headband Yes; Integrated Microphone No; Volume Keys No; Back Button Yes; Cover Type Opaque; Interactive Buttons Yes; Water Resistant
No; Hands Free Operation No; Included: Remote Control Included Yes; Number Of Controllers Included 2; Motion Tracking Sensors Included Yes; Controller(s) Yes; Software de Desarrollo de aplicaciones. | 1,00 | UN | 1.869.787,00 | | 52161500 | Leap Motion Universal VR Developer Bundle: The Leap Motion Universal VR Developer Bundle lets you interact directly with digital content on Windows PCs using your bare hands; Compatible con Windows 7/8 or Mac OS X 10.7; Quick setup: download the Leap Motion software, plug the device into your USB port, and you?re ready to go; Download free apps for desktop and virtual reality on the Leap Motion Gallery; If you're a developer, use the Leap Motion platform for maker projects, virtual reality applications, and more Real 3D interaction: 150-degree field of view creates a wide interactive space between you and your computer Accurate, sub-millimeter hand tracking with extremely low latency The Leap Motion Controller lets you interact directly with digital content on Windows PCs using your bare hands. (Legacy support for Mac OS X is also available.) Quick setup: download the Leap Motion software, plug the device into your USB port, and you?re ready to go. Download free apps for desktop and virtual reality on the Leap Motion Gallery. If you're a developer, use the Leap Motion platform for maker projects, virtual reality applications, and more. Real 3D interaction: 150-degree field of view creates a wide interactive space between you and your computer. Accurate, sub-millimeter hand tracking with extremely low latency. | 1,00 | UN | 487.602,00 | | 60104702 | Solar Power Manager Micro (2V 160mA Solar Panel Included): Solar Power Manager Micro (2V 160mA Solar Panel Included)
Solar Power Manager Micro is a micro power, high-efficiency solar power management module, designed for powering IoT based low-power wireless sensors or controllers with 1V~3V small size solar panels. Benefited from its extremely low power dissipation and MPPT (maximum power point tracking), the module is able to maximize the conversion efficiency of solar energy under weak sunlight. These features make low-power wireless devices charge-free and battery replacement-free possible by pure solar power.
The module employs constant voltage ratio MPPT (Maximum Power Point Tracking) algorithm to maximize output power of the solar panel under various sunlight. It can charge a 3.7V lipo battery through solar or USB, providing charge current up to 70mA or 100mA respectively. A 3.3V 90mA regulated output can handle burst current of most low-power wireless devices during transmitting or receiving. In low-power solar projects, lipo battery may suffer from over-discharge problem when it is cloudy for days, or the capacity of battery can not meet the device?s need. The battery over-charge and over-discharge protections are designed to prevent such problems to extend battery life.
Constant voltage ratio MPPT algorithm, maximizing solar power conversion
Designed for 1V ~ 3V small solar panels, ultra low power design
Solar/USB two charging methods
Multiple protections extending battery life | 2,00 | UN | 60.779,00 | | 60104702 | Solar Power Manager 5V: Solar Power Manager 5V
Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.
It features as MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel. The module can provide up to 900mA charging current to 3.7V Li battery with USB charger or solar panel. The ON/OFF controllable DC-DC converters with 5V 1A output satisfies the needs of various solar power projects and low-power applications. The module also employs various protection functions for battery, solar panel and output, which greatly improves the stability and safety of your solar projects.
Constant voltage MPPT algorithm, maximizing solar panel efficiency
Designed for 5V solar panel
Double charging mode: solar/USB charger (900mA max charge current)
5V ON/OFF controllable regulated power supply for low-power applications
All-round protection functions
USB connector with ESD shell | 2,00 | UN | 45.160,00 | | 60104702 | Semi Flexible Monocrystalline Solar Panel (5V 1A): Semi Flexible Monocrystalline Solar Panel (5V 1A)
This powerful monocrystalline solar panel features an A-class monocrystalline silicon panel. Due to up to 21% conversion efficiency and waterproof design, you don't have to worry about rains. It can supply plenty of power in various environments to prevent the system from shutting down, even in rainy days.
Operating Voltage: 5V
Operating Current: 1A
Maximum power: 5W
Open-circuit Voltage: 6V
Short circuit current: 1.1A
Material: Monocrystalline Silicon Flexible Lamination
Wire length: 1m
Product size: 29*15*0.135cm / 11.41*5.9*0.05 in
Working temperature: -20 ° C ~ 60 ° C | 2,00 | UN | 96.464,00 | | 32101667 | OpenMV Cam H7 Image Sensor nodule: OpenMV Cam H7 Image Sensor module
The OpenMV Cam H7 Image Sensor is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real world. STM32H743VI ARM Cortex M7 processor running at 400 MHz with 1MB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. You program the OpenMV Cam in high-level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++.
OpenMV Cam H7 with an OV7725 image sensor
ARM Cortex M7 processor running at 400 MHz
1MB of RAM and 2 MB of flash
640x480 8-bit Grayscale or 640x480 16-bit RGB565 images
60 FPS for 320x240 resolution or 120 FPS when below
2.8mm Lens on a standard M12 lens mount
All pins are 5V tolerant with 3.3V output
All pins can sink or source up to 25mA
P6 is not 5V tolerant in ADC or DAC mode
Up to 120mA may be sinked or sourced in total between all pins
VIN may be between 3.6V and 5V
Do not draw more than 250mA from your OpenMV Cam's 3.3V rail | 2,00 | UN | 318.771,00 | | 53103101 | Chaleco Tactico Militar: Material de alta calidad 600D Oxford, resistencia a la tracción y resistencia al desgaste más fuertes, cómodo y duradero.
Frontal y posterior adoptan el diseño de molle, pueden transportar fácilmente otros dispositivos pequeños.
La parte lateral del hombro y la cintura adopta un diseño mágico de cinta y hebilla que le permite usar y quitarse este chaleco táctico rápida y cómodamente.
Con 3 bolsas de accesorios desmontables para satisfacer las diferentes necesidades de almacenamiento.
Una de las bolsas de accesorios adopta un gran diseño de cinta mágica, donde puedes pegar una insignia como tu identificación.
Material: hecho de 600D encriptación oxford cloth.
El tamaño desplegable: 50 x 48 x 5 cm
Este chaleco táctico se adapta a personas de menos de 100 kg. La cintura se puede ajustar con la correa ajustable en el lateral y el perímetro máximo es de 112 cm. | 1,00 | UN | 142.413,00 | | 53121601 | Canguro Piernero Tactico Militar: Canguro Piernero Tactico Militar
Reata para ajuste de cintura y reata para ajuste de pierna
Dos blosillo o compartimentos para guardar elementos o dispositivos
Color: negro
Materiales: Lona
Tamaño: 32 x 23cm / 1.2 x 0.9in | 1,00 | UN | 81.396,00 | | 53102504 | Guantes Tácticos Militares: PAR DE GUANTES TÁCTICOS MILITARES BLACK EAGLE O.A.K.L.A.I. HALF FINGER® (NEGRO)
CARACTERÍSTICAS:
? Guantes tácticos para fuerzas especiales.
? Articulaciones de la palma y del dedo están reforzadas para un uso cómodo, no apretado.
? Especialmente diseñados, para el personal de fuerzas especiales.
? Guantes protectores adecuados para el ataque, rescate, lucha, escalada o la acción; utilizados para proteger las manos.
? Muñeca con correa ajustable, guantes alineados internamente contra el desgaste.
? El dorso de la mano y el dedo, tienen almohadillas de protección delgadas.
? Coeficiente de resistencia al desgaste, antideslizante y anti-impacto.
ESPECIFICACIONES TÉCNICAS
? CATEGORÍA: Guantes tácticos de medio dedo, guantes militares
? METERIAL: Nylon, Spandex
? FUNCIÓN: Transpirable, permeabilidad al aire
? TALLA M: 17.5cm-20.5cm 7"a 8" | 1,00 | UN | 66.045,00 | |
| Código UNSPSC | Descripción | Cantidad | Unidad | Precio unitario estimado | Precio unitario |
---|
32101626 | Tarjeta de Desarrollo Raspberry Pi 3 B+: CanaKit Raspberry Pi 3 B+ (B Plus) Ultimate Starter Kit (32 GB Edition, Clear Case)
Includes Made in UK Raspberry Pi 3 B+ (B plus) with 1.4 GHz 64-bit Quad-Core Processor, 1 GB RAM, Dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Enhanced Ethernet Capability
32 GB Micro SD Card (Class 10) pre-loaded with NOOBS, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)
High Quality Raspberry Pi 3 Case, Premium Quality 6.5 feet HDMI Cable, Heat Sink, CanaKit Full Color Quick-Start Guide
CanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Large Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference Cards
RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches | 2,00 | UN | 448.928,00 | | 32101626 | Tarjeta de Desarrollo LattePanda 4G/64GB: Tarjeta de desarrollo LattePanda de ultima generación con Licencia Windows 10 Enterprise
Processor Intel Cherry Trail Z8350 Quad Core
Base Frequency: 1.44GHz (1.92GHz Burst Frequency)
Operation System Pre-installed full edition of Windows 10 Enterprise LTSB x64 with activate key
Ram 4GB DDR3L
Storage Capability 64GB
GPU Intel HD Graphics 12EUs a 200-500Mhz single-channel memory
One USB3.0 port and two USB 2.0 ports
WiFi 802,11n 2.4G and Bluetooth 4.0
Built-in Arduino Co-processor ATmega32u4 (Aerduino Leonardo)
Video output HDMI and MIPI-DSI
Onboard touch panel overlay connector
Supports 100Mbps Ethernet
GPIO 6 GPIOs from Cherry Trail processor
20 GPIOs from Arduino Leonardo
6 Plug and play Gravity sensor connectors
Power 5v/2A
Dimension of board 88*70 mm/ 3.46*2.76 inches
Packing Size 110*94*30 mm/4.33*3.70*1.18 inches | 2,00 | UN | 1.181.046,00 | | 43202005 | Memoria Flash uSD 64GB: Tarjeta de memoria microSD UHS-I de 32 GB, velocidad de lectura hasta 100MB/s, Clase 10
Capacidad: 32GB
Velocidad de lectura: hasta 100MB/s
Velocidad de video: C10, U1, A1
Factor de forma: microSDXC | 4,00 | UN | 52.033,00 | | 32101667 | 3D Depth Camera Intel Realsense D435: Camara 3D con sensor de profundidad Intel Realsense D435
Especificaciones
Tecnología de profundidad Stereoscopic
Resolución y FPS profundos 1280 X 720
Campo de visión profundo 85.2 x 58
Sensor de RGB
Dimensiones 90mm x 25mm x 25mm
Tipo de interfaz de sistema USB 3.0 Type C | 2,00 | UN | 1.157.008,00 | | 32101667 | Seed Studio DepthEye 3D: Camara ToF de profundidad DepthEye de Seed Studio
The Depth Eye is the cost-effective TOF base depth camera. It use TI opt8320 sensor and pass all depth data including pointcloud via USB cable.
Caracteristicas
USB 2.0 interface
Provide Pointcloud and RAW depth data
FOV?D*H*V ? 90*75*59mm
2850nm band infrared LED
F/NO. is 1.09
TI OPT8320 sensor
Resolution is 80*60 pixeles | 1,00 | UN | 899.908,00 | | 26111701 | Batería Recargable Li-Po: Batería Recargable de Polímero de Litio
Conector JST XHR 2.54mm 2 pin
Capacidad 3.7V 1000mAh | 4,00 | UN | 24.396,00 | | 39121528 | LIDAR: tinyLiDAR ToF Range Finder Sensor
Eye Safe Laser 940nm Class 1
Long Range: up to 2 meters / Accuracy: 3%
Integrated level shifter for native 3v to 5v operation
Remotely re-configurable I2C board address and operation modes
60Hz sample rates
Advanced Technology Eye safe VCSEL Class 1 Laser
Ultra Fast up to 60Hz sample rates and up to approx 930Hz I2C reading rates even with an Arduino UNO
Accurate to 3% with mm precision
Dimensions 21x25x8.3mm | 2,00 | UN | 135.512,00 | | 26101200 | Motor vibrador tipo disco: The 2mm Mini Vibrating Disk Motor worked at 3V can be used for multipurposes.
Mini vibration motor 2.0mm
Rated Voltage: 3.0V DC
Flat coreless core
Motor construction: 10- Flat coreless vibration motor
Coil construction: Flat coreless core
Rectifying method: Precious brush and commutator
Rated Load: Vibration weight
Rotation direction: CCW or CW
Motor position: Any position available
Voltage range for use: DC 2.5V - 3.5V
Allowable temperature range: -20ºC to 70ºC
Storage environment: -30ºC- 80ºC
Thickness: 2mm
Diameter: 10mm | 20,00 | UN | 6.492,00 | | 39122002 | Haptic Motor Driver Board: The SparkFun Haptic Motor Driver - DRV2605L is capable of driving two different types of motors, ERM and LRA. It is important to know, however, that the default firmware for the DRV2605L is set for use with ERM-type motors. An Arduino library that makes the DRV2605L easy to use with six different ERM effects and one LRA effect is available.
Flexible Haptic and Vibration Driver
Suitable for both ERM and LRA type motors
I2C-Controlled Digital Playback Engine
PWM input with 0?100% Duty-Cycle Control Range | 20,00 | UN | 39.478,00 | | 32101600 | Touch sensor Board: Capacitive Touch Slide Sensor Board
SeeedStudio Grove Capacitive Touch Slide Sensor CY8C4014LQI
Comes with a 32-bit MCU Subsystem
Uses a 16-MHz ARM Cortex-M0 CPU
Automatic hardware tuning (SmartSense) over a sensor range of 5pF to 45pF
Provides an I2C interface
Weight: G.W 8.20g
Operating Voltage 3.3V / 5V
Operating Ambient Temperature -40 °C to +85 °C
Operating Junction Temperature -40 °C to +100 °C
Interface: I2C
Default I2C Address 0x08
Size 20mm x 60mm x6mm | 2,00 | UN | 46.232,00 | | 32101661 | IMU sensor Board: Sensor inercial montado en board 9-DOF Absolute Orientation IMU Fusion BNO055 Board
The BNO055 can output the following sensor data:
Absolute Orientation (Euler Vector, 100Hz) Three axis orientation data based on a 360° sphere
Absolute Orientation (Quaterion, 100Hz) Four point quaternion output for more accurate data manipulation
Angular Velocity Vector (100Hz) Three axis of 'rotation speed' in rad/s
Acceleration Vector (100Hz) Three axis of acceleration (gravity + linear motion) in m/s^2
Magnetic Field Strength Vector (20Hz) Three axis of magnetic field sensing in micro Tesla (uT)
Linear Acceleration Vector (100Hz) Three axis of linear acceleration data (acceleration minus gravity) in m/s^2
Gravity Vector (100Hz) Three axis of gravitational acceleration (minus any movement) in m/s^2
Temperature (1Hz) Ambient temperature in degrees celsius
Dimensions: 20mm x 27mm x 4mm / 0.8" x 1.1" x 0.2"
Header holes begin 4mm from the mounting holes
Mounting Hole dimensions: 20mm x 12mm apart
Uses I2C address 0x28 (default) or 0x29
Weight: 3g | 1,00 | UN | 123.225,00 | | 41111926 | Gesture Sensor Board: The ZX Distance and Gesture Sensor Board is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor uses their GestureSense® technology to recognize the distance of an object away from the sensor up to about 12 inches (30cm, referred to as the ?Z? axis) and the location of the object from side to side across the sensor in about a 6-inch (15cm) span, referred to as the ?X? axis. You will be able to use I2C or UART to communicate with the ZX Sensor via a microcontroller or computer.
Operating Voltage: 3.3V?5V
Z-Axis Recognition Range: 12 inches (~30cm)
X-Axis Recognition Range: 6 inches (~15cm)
4 Supported Gesture Commands
I2C or UART Communication
SMD Components and Compact Design | 1,00 | UN | 123.612,00 | | 41111926 | Gesture Sensor Board: The Gesture Sensor Board offers touchless gesture sensing, which means you can issue orders simply with a swipe of your hand! Except this, it supports RGB color detecting and ambient light measuring. This sensor has a high quality and accuracy: Its sensor module uses the APDS-9960 chip (a single 8 pin package digital RGB, ambient light, short and gesture sensor device); infrared LED helps measuring the short-range and gestures. Moreover, the sensor is able to work under low- light conditions thanks to its RGB and environmental light perception measurement.
High quality and accuracy
Able to work under low light conditions
Touchless gesture sensing
Operating Voltage: 3.3-5V
Interface:
I2C interface x1
Interrupt pin x1
Detecting range: 100mm
Module size: 18.3x16.4mm | 1,00 | UN | 103.030,00 | | 41111926 | Gesture Sensor Board: The Grove - Gesture Sensor Board that integrates gesture recognition function with general I2C interface into a single chip.
9 gesture recognition
Built-in proximity detection
Can recognize 9 gestures including move up, move down, move left, move right, etc
Can make a remote-control unit
Interface:IIC
Operating Power:5V
Dimensions:20*20mm
Sensor: PAJ7620U2
Detecting range: 5 ? 15cm
Ambient light immunity: < 100k Lux
Gesture speed mode: Normal and Gaming | 1,00 | UN | 73.477,00 | | 41111926 | Human Presence Sensor Board: The Grove Human Presence Sensor AK9753 Board can be used to detect the presence of the human body or any other infrared objects. Moreover, it is composed of four quantum IR sensors and an integrated circuit for characteristic compensation.
Grove Human Presence Sensor
Quantum-type IR Sensor with 4 IR Elements
16-bits Digital Outputs to I2C bus
Integrated temperature sensor
Interrupt Function / Low Current Consumption
Quad infrared sensor module
16-bit reading on all four channels
Digital I2C Interface
Voltage: 1.7V to 3.3V
Extremely low current: 100µA | 2,00 | UN | 94.814,00 | | 52161520 | Microfono piezoelectrico montado en Board: ADMP401 MEMS Microphone Board
-3dB roll off at 100Hz and 15kHz
1.5 to 3.3VDC supply voltage
Should comfortably output 40mW
SNR of -62dBA | 1,00 | UN | 61.910,00 | | 52161500 | Modulo conversor de texto a voz: The Parallax Emic 2 Text-to-Speech Module is a voice! Designed in conjunction with Grand Idea Studio, the Emic 2 Text-to-Speech Module is a multi-language voice synthesizer that converts a stream of digital text into natural sounding speech. Its simple command-based interface makes it easy to integrate into any embedded system.
Operating Temperature: -20 to +70 ºC (-4 to +158 ºF)
High quality speech synthesis for English and Spanish languages
Power requirements: +5 VDC, 30 mA idle, 46-220 mA active
Communication: Asynchronous 9600 bps serial (8N1) | 2,00 | UN | 370.685,00 | | 52161500 | Módulo de reconocimiento de voz: The EasyVR DK Speech Recognition Module 3.0 is a multi-purpose speech recognition module designed to easily add versatile, robust and cost effective speech recognition capabilities to almost any application. It can be used with any host with an UART interface powered at 3.3V ? 5V, such as PIC and Arduino boards.
Up to 32 user-defined voice commands that can be trained in ANY language
A selection of 26 built-in Speaker Independent (SI) commands for ready-to-run basic controls
Includes QT2SI Lite License
SonicNet technology for wireless communications between modules or any other sound
Up to 22 minutes of pre-recorded sounds or speech
Differential audio output that directly supports 8? speakers
Use QuickUSB 3.3V USB to UART Interface Cable to use with a PC
Supports audio message recording and playback
Included
EasyVR 3 Module
QuickUSB cable
QT2SI Lite License | 2,00 | UN | 1.308.256,00 | | 52161500 | Gafas de sol con auriculares y microfono integrado Bluetooth: Gafas De Sol Inalámbricas Forestfish Color Negro Con Micrófono y Auriculares Bluetooth y sensor touch | 1,00 | UN | 373.095,00 | | 32101626 | Intel Neural Compute Stick 2: The Intel Movidius Neural Compute Stick 2 is a miniature deep learning hardware development platform that you can use to prototype, tune, and validate, your AI programs, specifically Deep Neural Networks. It features the same Movidius vision processing unit (VPU) used to bring machine intelligence to drones, surveillance cameras, and VR or AR headsets now, in a USB stick form factor.
Real-time on-device inference; no cloud connectivity required
No additional heat-sink, no fan, no cables, no additional power supply
Prototype, tune, validate and deploy deep neural networks at the edge | 2,00 | UN | 579.797,00 | | 39121528 | TeraRanger Evo 3m ToF Rangefinder: The TeraRanger Evo 3m ToF Rangefinder offers 10cm to 3m range, 100Hz fixed update rate and greater accuracy, Evo 3m, is optimized for close-range distance measurement All in an easy to use, small and lightweight form-factor.
Range: 0.1 ? 3 meters
Update Rate Fixed 100Hz
Field of view 2° Approx
USB, 12C and Uart interfaces
Range Resolution 0.5cm
Accuracy: ±2cm
Supply Voltage: 5V DC +/-5%
Supply Current: 70mA-250mA
Black sensor module 9g
Yellow backboard 3g
Total: 12g
Range: 0.1 ? 3 meters
Update rate: Fixed 100Hz
Field of view: 2° Approx
Interfaces USB 2.0 Micro-B, UART, I2C | 1,00 | UN | 650.811,00 | | 32101656 | Modulo GPS GSM GPRS: The Elecrow 32u4 w/ A9G GPRS GSM GPS Board is based on Mega32u4 and A9 GPRS / GSM / GPS module. It can be used to make a call, send a text message and get GPS positioning.
Support the GSM / GPRS / GPS Quad-band, including 850, 900, 1800, 1900 MHz
Is equipped with a 3.5mm headphone jack
Comes with a low standby average current, only 3mA or less
Working voltage: 3.3 - 5V
Operating temperature: -30 °C to + 80 ?
Quad-band: 850 / 900 / 1,800 / 1,900 MHz
GPRS multi-slot: 12.1 to 12 can be configured
GPRS mobile station: Class B
Current consumption: 1.3mA @ DRX = 5; 1.2mA @ DRX = 9
AT command control: Standard GSM07.07, 07.05 AT commands and Ai-Thinker extended commands
GPRS Class 10: Up 85.6 kbps (upstream) & 42.8Kbps (downlink)
Dynamic Conditions Altitude: <18,000 meters (60,000 feet) | 2,00 | UN | 111.666,00 | | 41111960 | Micro sensor ultrasonido: Micro Sensor Ultrasonido RCW-0001
Distance Measuring module robot electronics 3.3-5v 1cm Ultra-small blind Ultrasonic Sensor
Working Voltage: 3.0V to 5.5VDC
Compatible with HC-SR04 protocol
Pin to pin compatible with HC-SR04, direct replacement
Minimum detection distance: 1cm
Maximum detection range:
3.3V: 400cm
5.0V: 450cm
Operating current:
3.3V: 2.2mA
5.0V: 2.8mA
Resolution: 1mm
Detection angle: 15º
Operating temperature: -20ºC to +80ºC | 12,00 | UN | 16.689,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Blanco para Impresora 3D 1Kg | 2,00 | UN | 173.442,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Negro para Impresora 3D 1Kg | 2,00 | UN | 173.442,00 | | 44103100 | Rollo de filamento para impresora 3D: Rollo de Filamento PLA 1.75mm color Trasparente para Impresora 3D 1Kg | 2,00 | UN | 237.851,00 | | 32101628 | Arduino Micro: El nuevo Arduino Micro es una evolución de su hermano mayor Arduino Leonardo ya que utiliza el mismo chip ATmega32u4 pero en un formato mucho más pequeño de tan solo 48x18mm.Una de las mayores ventajas de este chip es que dispone de un puerto USB nativo que permite entre otras cosas de evitar tener un conversor serie/USB y además de poder programar la placa como un dispositivo USB cliente como un teclado o un ratón.
Microcontrolador: ATmega32u4
Voltaje de operación: 5v
Voltaje de alimentación (Recomendado): 7-12V
Canales PWM: 7
Entradas Análogas: 12
Cristal oscilador: 16MHz
Dimensiones: 48x18mm
Precargado con bootloader
Puede ser programado como un dispositivo USB genérico. | 4,00 | UN | 109.182,00 | | 52161500 | Oculus - Rift + Touch Virtual Reality Headset Bundle for Compatible Windows PCs - Black: Sensors Proximity Sensor; Movement Tracking Yes; Wireless No; Control Type Motion Controller;Integrated Speaker(s) Yes; Adjustable Headband Yes; Integrated Microphone No; Volume Keys No; Back Button Yes; Cover Type Opaque; Interactive Buttons Yes; Water Resistant
No; Hands Free Operation No; Included: Remote Control Included Yes; Number Of Controllers Included 2; Motion Tracking Sensors Included Yes; Controller(s) Yes; Software de Desarrollo de aplicaciones. | 1,00 | UN | 1.869.787,00 | | 52161500 | Leap Motion Universal VR Developer Bundle: The Leap Motion Universal VR Developer Bundle lets you interact directly with digital content on Windows PCs using your bare hands; Compatible con Windows 7/8 or Mac OS X 10.7; Quick setup: download the Leap Motion software, plug the device into your USB port, and you?re ready to go; Download free apps for desktop and virtual reality on the Leap Motion Gallery; If you're a developer, use the Leap Motion platform for maker projects, virtual reality applications, and more Real 3D interaction: 150-degree field of view creates a wide interactive space between you and your computer Accurate, sub-millimeter hand tracking with extremely low latency The Leap Motion Controller lets you interact directly with digital content on Windows PCs using your bare hands. (Legacy support for Mac OS X is also available.) Quick setup: download the Leap Motion software, plug the device into your USB port, and you?re ready to go. Download free apps for desktop and virtual reality on the Leap Motion Gallery. If you're a developer, use the Leap Motion platform for maker projects, virtual reality applications, and more. Real 3D interaction: 150-degree field of view creates a wide interactive space between you and your computer. Accurate, sub-millimeter hand tracking with extremely low latency. | 1,00 | UN | 487.602,00 | | 60104702 | Solar Power Manager Micro (2V 160mA Solar Panel Included): Solar Power Manager Micro (2V 160mA Solar Panel Included)
Solar Power Manager Micro is a micro power, high-efficiency solar power management module, designed for powering IoT based low-power wireless sensors or controllers with 1V~3V small size solar panels. Benefited from its extremely low power dissipation and MPPT (maximum power point tracking), the module is able to maximize the conversion efficiency of solar energy under weak sunlight. These features make low-power wireless devices charge-free and battery replacement-free possible by pure solar power.
The module employs constant voltage ratio MPPT (Maximum Power Point Tracking) algorithm to maximize output power of the solar panel under various sunlight. It can charge a 3.7V lipo battery through solar or USB, providing charge current up to 70mA or 100mA respectively. A 3.3V 90mA regulated output can handle burst current of most low-power wireless devices during transmitting or receiving. In low-power solar projects, lipo battery may suffer from over-discharge problem when it is cloudy for days, or the capacity of battery can not meet the device?s need. The battery over-charge and over-discharge protections are designed to prevent such problems to extend battery life.
Constant voltage ratio MPPT algorithm, maximizing solar power conversion
Designed for 1V ~ 3V small solar panels, ultra low power design
Solar/USB two charging methods
Multiple protections extending battery life | 2,00 | UN | 60.779,00 | | 60104702 | Solar Power Manager 5V: Solar Power Manager 5V
Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.
It features as MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel. The module can provide up to 900mA charging current to 3.7V Li battery with USB charger or solar panel. The ON/OFF controllable DC-DC converters with 5V 1A output satisfies the needs of various solar power projects and low-power applications. The module also employs various protection functions for battery, solar panel and output, which greatly improves the stability and safety of your solar projects.
Constant voltage MPPT algorithm, maximizing solar panel efficiency
Designed for 5V solar panel
Double charging mode: solar/USB charger (900mA max charge current)
5V ON/OFF controllable regulated power supply for low-power applications
All-round protection functions
USB connector with ESD shell | 2,00 | UN | 45.160,00 | | 60104702 | Semi Flexible Monocrystalline Solar Panel (5V 1A): Semi Flexible Monocrystalline Solar Panel (5V 1A)
This powerful monocrystalline solar panel features an A-class monocrystalline silicon panel. Due to up to 21% conversion efficiency and waterproof design, you don't have to worry about rains. It can supply plenty of power in various environments to prevent the system from shutting down, even in rainy days.
Operating Voltage: 5V
Operating Current: 1A
Maximum power: 5W
Open-circuit Voltage: 6V
Short circuit current: 1.1A
Material: Monocrystalline Silicon Flexible Lamination
Wire length: 1m
Product size: 29*15*0.135cm / 11.41*5.9*0.05 in
Working temperature: -20 ° C ~ 60 ° C | 2,00 | UN | 96.464,00 | | 32101667 | OpenMV Cam H7 Image Sensor nodule: OpenMV Cam H7 Image Sensor module
The OpenMV Cam H7 Image Sensor is a small, low power, microcontroller board which allows you to easily implement applications using machine vision in the real world. STM32H743VI ARM Cortex M7 processor running at 400 MHz with 1MB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. You program the OpenMV Cam in high-level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++.
OpenMV Cam H7 with an OV7725 image sensor
ARM Cortex M7 processor running at 400 MHz
1MB of RAM and 2 MB of flash
640x480 8-bit Grayscale or 640x480 16-bit RGB565 images
60 FPS for 320x240 resolution or 120 FPS when below
2.8mm Lens on a standard M12 lens mount
All pins are 5V tolerant with 3.3V output
All pins can sink or source up to 25mA
P6 is not 5V tolerant in ADC or DAC mode
Up to 120mA may be sinked or sourced in total between all pins
VIN may be between 3.6V and 5V
Do not draw more than 250mA from your OpenMV Cam's 3.3V rail | 2,00 | UN | 318.771,00 | | 53103101 | Chaleco Tactico Militar: Material de alta calidad 600D Oxford, resistencia a la tracción y resistencia al desgaste más fuertes, cómodo y duradero.
Frontal y posterior adoptan el diseño de molle, pueden transportar fácilmente otros dispositivos pequeños.
La parte lateral del hombro y la cintura adopta un diseño mágico de cinta y hebilla que le permite usar y quitarse este chaleco táctico rápida y cómodamente.
Con 3 bolsas de accesorios desmontables para satisfacer las diferentes necesidades de almacenamiento.
Una de las bolsas de accesorios adopta un gran diseño de cinta mágica, donde puedes pegar una insignia como tu identificación.
Material: hecho de 600D encriptación oxford cloth.
El tamaño desplegable: 50 x 48 x 5 cm
Este chaleco táctico se adapta a personas de menos de 100 kg. La cintura se puede ajustar con la correa ajustable en el lateral y el perímetro máximo es de 112 cm. | 1,00 | UN | 142.413,00 | | 53121601 | Canguro Piernero Tactico Militar: Canguro Piernero Tactico Militar
Reata para ajuste de cintura y reata para ajuste de pierna
Dos blosillo o compartimentos para guardar elementos o dispositivos
Color: negro
Materiales: Lona
Tamaño: 32 x 23cm / 1.2 x 0.9in | 1,00 | UN | 81.396,00 | | 53102504 | Guantes Tácticos Militares: PAR DE GUANTES TÁCTICOS MILITARES BLACK EAGLE O.A.K.L.A.I. HALF FINGER® (NEGRO)
CARACTERÍSTICAS:
? Guantes tácticos para fuerzas especiales.
? Articulaciones de la palma y del dedo están reforzadas para un uso cómodo, no apretado.
? Especialmente diseñados, para el personal de fuerzas especiales.
? Guantes protectores adecuados para el ataque, rescate, lucha, escalada o la acción; utilizados para proteger las manos.
? Muñeca con correa ajustable, guantes alineados internamente contra el desgaste.
? El dorso de la mano y el dedo, tienen almohadillas de protección delgadas.
? Coeficiente de resistencia al desgaste, antideslizante y anti-impacto.
ESPECIFICACIONES TÉCNICAS
? CATEGORÍA: Guantes tácticos de medio dedo, guantes militares
? METERIAL: Nylon, Spandex
? FUNCIÓN: Transpirable, permeabilidad al aire
? TALLA M: 17.5cm-20.5cm 7"a 8" | 1,00 | UN | 66.045,00 | |
|
|